Skip to content
Rapax One 1 Joule Spring - SSG-10/24

Rapax One 1 Joule Spring - SSG-10/24

by Rapax
SKU 41989
£22.00 - £22.00
£22.00
£22.00 - £22.00
£22.00
  • Rapax One is 1J spring- made for – SRS/TAC41/SSG/VSR.
  • Can be used in Silverback SRS/TAC41, Novritsch SSG10, SSG24, SSG96, upgraded VSR10.
  • Made to comply with Ireland, Italy and all other countries regulated with 1J sniper limit.
  • Springs are 13mm outer diameter, so they fit all above mentioned sniper replicas.
  • Springs are made in Europe and Electroplated to prevent rust, reduce friction and give you prolonged period of usage compared to other springs.
  • Confirmed results of reaching 1 Joule with a standard SRS 16″ and SSG10 (430mm barrel).
  • Joules may vary depending on the barrel length and piston used.
  • Depending on setup effectiveness, spring can give more then 1J (1,2 for example). In that case, just cock the bolt and leave spring for 1 day, after that, try again and if needed just cut 2 coils. 
  • Instructions how to cut the spring here: https://rapaxsprings.com/how-to-cut-airsoft-spring/
  • If you have less power then you should add a spacer on a spring guide and you are good to go.
  • All springs are the same length, use the same material, have the same number of coils, etc.
  • Tempering of these springs is made in a way to guarantee a long lifetime and very small FPS/Joule loss over time.
  • These springs are made in tight tolerances regarding diameter, they prevent the “twang” sound in airsoft sniper replicas.
  • Before you install, put a suitable amount of grease on the spring & spring guide.