Click or scroll to zoom
Tap or pinch to zoom
Maxx Model CNC Aluminum Hopup Chamber - ASG EVO
Click or scroll to zoom
Tap or pinch to zoom
Maxx Model CNC Aluminum Hopup Chamber - ASG EVO
Click or scroll to zoom
Tap or pinch to zoom
Maxx Model CNC Aluminum Hopup Chamber - ASG EVO
Click or scroll to zoom
Tap or pinch to zoom
Maxx Model CNC Aluminum Hopup Chamber - ASG EVO
Maxx Model CNC Aluminum Hopup Chamber - ASG EVO

Maxx Model CNC Aluminum Hopup Chamber - ASG EVO

by Maxx Model
£62.00
SKU MX-HOP020EVO
  • CNC Aluminum Hopup Chamber EVO unit is precisely machined to perform accurately and consistently on the ASG 2018+ CZ Scorpion EVO-3 Airsoft Rifles.
  • The Hopup Chamber EVO unit is built with a Precision Aluminum Rotary Dial Knob for fine hopup adjustments and equipped with 4mm Flat Soft Bucking Nub (6mm Bucking Nub is optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.
  • The Hopup Chamber EVO unit is designed to accept the 18.5mm nozzle length, and is fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use.
  • The Hopup Chamber EVO unit is cleverly built with a self-centering inlet to ensure the hopup unit is inserted exactly in the center of the 11.5mm inner bore ASG EVO-3 gear box outlet without wobbling.
  • Also includes an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.

    ***The Dual UV LED Tracer Module is an add-on option to allow the illuumination of tracer BBs. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
    ***Test results: FPS might be increased from 10-30fps over the stock setup. Please check your fps after in installation. Can also be manually pressed to release the remaining BB from inside the     Hop-Up chamber.
  • Includes:
  • 1 x CNC Aluminum Hopup Chamber EVO unit
    1 x Dual UV LED Boards and Module set (optional)
    2 x Strong Clear Vinyl Cover set
    1 x CNC Aluminum Soft Round Nub
    1 x CNC Aluminum Soft Flat Nub (4mm) (Pre-installed)
    2 x Steel Nub Spring
    1 x Steel Compression Spring
    1 x Brass Dial Bushing
    1 x Dial O-ring
    1 x CNC Precision Aluminum Rotary Dial Knob
    1 x CNC Delrin Locking C-Clip
    1 x CNC Brass Barrel Spacer
    1 x Brass Barrel Spacer Holder O-ring
  • Specifications:
  • Overall Length: 47mm
    Overall Height: 26.25mm
    Inlet Diameter: 11.5mm
    Hub Outer Diameter (to fit into Outer Barrel): 12mm
    Hub Inner Diameter (to fit Nozzle): 7mm
    Material: Brass/Aluminum 6061
  • Features
  • Machined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability
    Performed accurately and consistently on the ASG 2018 CZ Scorpion EVO-3 Airsoft Rifles
    Built-in Precision Aluminum Rotary Dial Knob for fine hopup adjustments
    Pre-installed 4mm Flat Soft Bucking Nub (6mm Bucking Nub is optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
    Accepted the 18.5mm nozzle length
    Fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
    Wisely built with a self-centering inlet to ensure the hopup unit is inserted exactly in the center of the 11.5mm inner bore ASG EVO-3 gear box outlet without wobbling
    Included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting
    The Dual UV LED Tracer Module to glow BB in the dark ready!

Related products

You recently viewed

Clear recently viewed